PEATY'S sealant 120ml Trail Pouch
Our unique trail pouch has been designed to get you started with enough sealant to do two 27.5" wheels, and to be the perfect emergency refill when out on the trails or at the races.
Chuck it into your trail bag, glovebox or toolbox and use the 60ml filling guide printed onto the rear of the pouch to assist with topping up. The spout has also been designed to assist with injecting through a de-cored valve, or directly into the tyre - whichever you prefer!
Don't throw it away though - simply refill your old pouch from our 1ltr workshop bottle and you're good to go again!
SET UP INSTRUCTIONS
» 1. Shake the bottle vigorously before every use to ensure an even distribution of platelets.
» 2. Rinse away any old sealant from the tyre and dry off completely.
» 3. Seat your tyre onto the rim and inflate initially with no sealant, using a track pump, inflator or compressor to pop the tyre bead fully onto the rim.
» 4. Deflate the tyre and, with the valve at the three o’clock position, use the flexible injector pipe provided to inject the desired amount of sealant directly through the de-cored valve.
» 5. Re-insert the valve core and re-inflate the tyre to desired pressure.
» 6. Distribute the sealant around inside the tyre by spinning the wheel and tapping the tyre on the floor.
» 7. Listen for any air leaks and orientate the wheel so that the sealant flows around the inside of the tyre to the area required. continue doing this until you can’t hear any more air loss*
» 8. Wash away any excess sealant that may have found its way to the outside of the tyre or rim with water.
» 9. Check tyre pressures and ride!
*If a seal can’t be made, add more sealant in increments as required
» C02 compatible
» Seals up to 6mm holes
» Operating pressures: 15 to 120 psi
» Operating temperature: -20°c to +50°c
» Seals porous tyres and bead/rim gaps
» Road 30 - 45ml
» Cyclocross 60 - 75ml
» 26” MTB 60 - 80ml
» 27.5” MTB 70 - 90ml
» 29” MTB 100 - 120ml
Quantities quoted per tyre. For wider rim / tyre combinations and / or additional puncture protection we recommend adding up to 30ml more sealant to the above quantities